3385 N Nevada St
Chandler, AZ 85225. Pull around to the shop entrance. Loading happens at the dock.
Chandler, AZ · Phoenix metro pickup
Spiral Pipe for HVAC Near Me 26-Gauge Galvanized, available for Phoenix Pickup
Code-grade spiral pipe in diameters 4 in through 24 in, cut to your length and leak-free. Fabricated at our Chandler shop and ready to collect at the dock. Design your run in the configurator below, or call and we will pull it for you.
- Diameters
- 4″ through
24″ standard
- Gauge
- 26 ga
galvanized
- Pickup
- Chandler, AZ
at the dock
- Order size
- No
minimum
Local pickup
Buy it here, local pickup
Our shop is at 3385 N Nevada St in Chandler. If you are working anywhere in the Phoenix metro, that is a short drive instead of a freight wait.
Mon to Fri, 8:00 to 4:00
Arizona time, which does not shift for daylight saving. Call ahead if you are driving in from outside the East Valley.
Configure, then collect
Build the run below and select local pickup at checkout. We message you when it is ready at the dock.
Call the shop
Know your sizes already? Call (480) 452-8069 and we will price it and pull it.
Bring the right vehicle
Spiral comes in long lengths. A truck bed, van, or rack beats a car trunk. Tell us the lengths and we will advise.
We ship too
Not local? We palletize and ship LTL freight to all 50 states with tracking.
Service area
Who picks up from us
Contractors and shops across the Phoenix metro collect spiral from our Chandler dock. Anywhere else in Arizona or the country, we ship.
| Area | How you get it |
|---|---|
| Chandler, Gilbert, Mesa, Tempe | Dock pickup, same week on standard sizes |
| Phoenix, Scottsdale, Glendale, Peoria | Dock pickup, or local delivery by arrangement |
| Queen Creek, Apache Junction, Maricopa | Dock pickup, or local delivery by arrangement |
| Tucson, Flagstaff, Prescott | Palletized LTL freight |
| All 50 states | Palletized LTL freight with tracking |
Build your run
Design it in the configurator
Pick a shape. Set the diameter and length. Add elbows, reducers, and end caps. Pricing updates as you build, then choose local pickup at checkout.
What you are buying
Spiral pipe, built to spec
Helical lockseam construction in galvanized steel. Cut to your length, so you are not joining short sticks to make a run.
| Diameter | Gauge | Availability |
|---|---|---|
| 4″ to 24″ | 26 ga galvanized | Standard, cut to length |
| 26″ to 36″ | Specified per job | Made to order |
| Any diameter | Heavier than 26 ga | Made to order |
| Any diameter | Stainless or aluminum | Made to order |
Made-to-order work is quoted within one business day. Fittings travel with the pipe on the same order. That covers elbows, reducers, start collars, and end caps.
Why spiral
The lockseam is the whole point
Spiral pipe is formed by rolling a continuous strip of galvanized steel into a helix and locking the edges together. That seam runs the length of the pipe and is what makes it rigid.
The result is a round section that holds its shape under negative pressure, leaks less at the joints than a longitudinal seam, and moves air with lower friction loss than rectangular duct of the same capacity. It also hangs on fewer supports, which matters on a long run.
Spiral detail
What to specify
Six things to settle before you order. All of them are options in the configurator above.
4 in to 24 in
Standard range in 26-gauge. Size it off your CFM and target velocity, not off what the last job used.
Cut to your run
We cut to the length you give us. Fewer joints means fewer places for a system to leak.
26 ga and heavier
26-gauge is standard across the range. Heavier gauges are made to order for higher pressure or abrasive service.
Galv, stainless, alum
Galvanized as standard. Stainless for washdown and corrosive air, aluminum where weight matters.
Elbows and reducers
Elbows, reducers, wyes, start collars, and end caps sized to the pipe on the same order.
SMACNA compliant
Seam construction, gauge, and tolerances all built to SMACNA, so it installs the way the submittal said.
Questions
Before you drive over
Where do I pick up spiral pipe near Phoenix?
At our shop, 3385 N Nevada St, Chandler, AZ 85225. Select local pickup at checkout and we will let you know when it is ready at the dock. Hours are Monday to Friday, 8:00 to 4:00.
What spiral-pipe diameters do you offer?
4″ through 24″ in 26-gauge as standard. Larger diameters, from 26″ to 36″, are made to order. So are heavier gauges.
Do you offer stainless or aluminum spiral?
Yes. High-quality stainless and aluminum are both available.
How is spiral pipe different from round duct?
Both are round. Spiral is formed by rolling a strip into a helix and locking the seam, which makes it more rigid and better sealed along its length. That is why it holds longer spans on fewer hangers.
What if I need a fitting that is not listed?
No problem. We fabricate custom duct fittings on request. Include the details in your submission, or send it through custom fabrication.
Can I add elbows, reducers, and end caps to the same order?
Yes. Add all the parts you need to the cart. We will bundle everything for one pickup.
What is the minimum order size?
There is no minimum. Order one 10-ft pipe or an entire truckload.
Can you ship instead of local pickup?
Yes. We palletize and LTL-ship nationwide. Let us know and we will pull a freight quote. Local pickup is still the quickest option, and it is available at checkout.